Appliance Repair Service (ApplianceRepair.co.ke) provides professional washer and fridge repairs at Mountain View for households and businesses experiencing appliance breakdowns, poor performance, unusual noises, water leaks, cooling problems, and other faults. Call 0720048519 to arrange appliance repair assistance.

Modern washing machines and refrigerators are complex appliances with electrical, electronic, mechanical, and refrigeration components. When one develops a fault, attempting to continue using it can sometimes make the problem worse. Professional diagnosis helps identify the underlying cause and determine whether a component needs adjustment, repair, replacement, or further testing.

Company Tip: “Do not ignore unusual appliance sounds, repeated error codes, water leaks, or changes in cooling and washing performance. Early diagnosis can help prevent a minor fault from developing into a more extensive repair.”

Washer and Fridge Repairs at Mountain View

Appliance Repair Service handles common faults affecting washing machines and refrigerators. The repair process normally begins with an assessment of the appliance, identification of symptoms, inspection of relevant components, and testing before the appropriate repair solution is recommended.

The technician may check:

  • Electrical connections and power supply

  • Control boards and electronic components

  • Motors and drive systems

  • Door and lid mechanisms

  • Water inlet and drainage systems

  • Pumps and hoses

  • Thermostats and temperature sensors

  • Refrigerator fans and compressors

  • Defrost systems

  • Wiring and connectors

  • Seals, gaskets, and other wear components

The objective is to establish why the appliance is malfunctioning rather than simply replacing parts without proper diagnosis.

Washing Machine Repair Services

A washing machine can develop faults in several different systems. Some problems are caused by blocked filters or hoses, while others may involve the motor, pump, control board, bearings, door lock, water inlet valve, or other components.

Common washing machine faults

Washer problem Possible cause Typical repair approach
Machine does not start Power supply, door lock, control board Electrical and control-system diagnosis
Does not fill with water Inlet valve, hose, filter, water supply Inspect and clean or replace faulty component
Does not drain Blocked filter, pump, drain hose Clear blockage or repair/replace pump
Drum does not spin Motor, belt, control system, load imbalance Test drive system and related components
Excessive vibration Unbalanced load, suspension, bearings Inspect suspension and drum assembly
Water leaking Hose, seal, pump, door gasket Locate leak and repair affected component
Clothes remain wet Drainage or spin problem Test pump, motor and spin cycle
Unusual noise Bearings, foreign object, motor or suspension Mechanical inspection and diagnosis
Door remains locked Door-lock mechanism or control fault Test lock and control circuit
Error code appears Sensor, electronic or mechanical fault Identify code and test related system

Company Advice: “Avoid repeatedly restarting a washing machine that is leaking, making severe grinding sounds, or failing to drain. Disconnect the appliance from power where appropriate and arrange for a qualified technician to investigate the fault.”

Washing Machine Problems That Need Professional Attention

Some washer problems appear simple but can have several possible causes. For example, a machine that does not spin could have a drainage problem, an overloaded drum, a defective motor component, a damaged belt, or an electronic control fault.

Similarly, excessive vibration does not always mean that the machine simply needs to be repositioned. Suspension components, bearings, drum assemblies, or other mechanical parts can also contribute to abnormal movement.

Professional washer repairs at Mountain View therefore involve checking the symptoms systematically.

Signs your washer may need repair

Look out for:

  1. The washing machine stops during a cycle.

  2. The drum fails to rotate.

  3. Water remains inside the drum.

  4. The machine repeatedly displays an error code.

  5. There is water around the appliance.

  6. The appliance produces unusual grinding or knocking sounds.

  7. Clothes come out excessively wet.

  8. The washer takes unusually long to complete a cycle.

  9. The appliance trips electrical protection.

  10. The machine does not respond to its controls.

Fridge Repair Services

A refrigerator is expected to maintain a relatively stable temperature throughout normal operation. When cooling performance changes, food can spoil and energy consumption may increase.

Appliance Repair Service provides fridge repairs at Mountain View for refrigerators experiencing cooling, electrical, drainage, temperature-control, and mechanical problems.

Common refrigerator faults

Fridge fault Possible causes Repair considerations
Fridge not cooling Compressor, thermostat, fan, refrigerant system Complete cooling-system diagnosis
Freezer not freezing Airflow, defrost, temperature or refrigeration fault Test temperature and refrigeration components
Excessive ice buildup Defrost system or door-seal problem Inspect defrost components and gasket
Water leaking inside Blocked drain or drainage problem Clear and inspect drainage system
Fridge too warm Thermostat, sensor, fan or cooling system Test temperature-control components
Compressor not starting Electrical components or compressor fault Electrical and compressor testing
Unusual humming Fan, compressor or vibration Identify source of noise
Excessive cycling Temperature control or cooling issue Test thermostat/sensors and cooling system
Door does not seal Damaged or misaligned gasket Adjust or replace seal
Fridge trips power Wiring or electrical component fault Electrical safety inspection

Company Tip: “If a refrigerator suddenly becomes warm, avoid opening the door unnecessarily while arranging an inspection. Keeping the door closed helps retain the available cold air for longer.”

Refrigerator Components We Inspect

Different refrigerator faults can originate from different components. A technician may inspect the:

  • Compressor

  • Condenser and evaporator systems

  • Thermostat

  • Temperature sensors

  • Evaporator fan

  • Condenser fan

  • Defrost heater

  • Defrost timer or electronic control

  • Door gasket

  • Drain system

  • Electrical wiring

  • Start relay and related components

  • Control board where applicable

Refrigeration faults require appropriate technical procedures because the cooling system operates under pressure and involves specialized components.

Why Professional Appliance Diagnosis Matters

Replacing a component without establishing the actual cause of a fault can result in unnecessary expenditure. A refrigerator that is not cooling, for example, may have a problem involving airflow, temperature control, defrosting, electrical starting components, or the refrigeration circuit.

A washing machine that will not drain could have a blocked filter rather than a failed pump.

Diagnosis therefore provides an important starting point for effective appliance repair.

Benefits of professional diagnosis

  • Identifies the likely source of the problem

  • Helps determine whether repair is practical

  • Reduces unnecessary component replacement

  • Identifies related faults

  • Helps protect the appliance from further damage

  • Provides a basis for selecting appropriate replacement parts

  • Helps restore normal appliance operation safely

Washer and Fridge Maintenance Advice

Regular maintenance can help reduce avoidable appliance problems.

Washing machine maintenance

  • Do not overload the drum.

  • Check pockets before washing clothes.

  • Clean the detergent drawer regularly.

  • Clean the drain filter according to the manufacturer's instructions.

  • Inspect inlet and drain hoses for damage.

  • Keep the machine level.

  • Avoid excessive detergent.

  • Check the door seal for trapped objects and residue.

  • Respond to unusual noises or leaks promptly.

Refrigerator maintenance

  • Keep the door gasket clean.

  • Avoid leaving the refrigerator door open unnecessarily.

  • Do not block internal airflow.

  • Avoid placing very hot food directly inside.

  • Keep the appliance properly ventilated.

  • Clean accessible components according to manufacturer guidance.

  • Check for unusual water accumulation.

  • Monitor changes in cooling performance.

Company Advice: “Routine maintenance is not a substitute for professional repair, but it can help you identify developing problems earlier and maintain reliable appliance performance.”

When to Call an Appliance Repair Technician

Some faults should not be handled as DIY projects, particularly where electrical components, refrigeration systems, sealed cooling circuits, or complex electronic controls are involved.

Contact a professional when:

  • The appliance repeatedly trips power.

  • There is a burning smell.

  • A refrigerator stops cooling.

  • A washing machine is leaking significantly.

  • A washer drum makes severe mechanical noises.

  • The appliance produces repeated error codes.

  • A refrigerator compressor does not operate normally.

  • The appliance has suffered electrical damage.

  • A component requires specialized testing or replacement.

Disconnecting an appliance from power can be an appropriate precaution when there is an obvious electrical hazard, but repairs should be performed by a suitably qualified technician.

Appliance Repair Service at Mountain View

Appliance Repair Service provides assistance for households looking for washer and fridge repairs at Mountain View. The service covers diagnosis and repair of common washing machine and refrigerator problems, with attention to the specific symptoms and appliance condition.

Whether a washer refuses to drain or spin, or a refrigerator is no longer maintaining the required temperature, obtaining a proper diagnosis can help determine the next repair step.

For appliance repair assistance, contact:

Appliance Repair Service
Website: ApplianceRepair.co.ke
Phone: 0720048519
Services: Washing machine and refrigerator diagnosis and repair

Frequently Asked Questions

1. What washing machine problems can be repaired?

Common repair requests include drainage failures, spin problems, water leaks, unusual noises, door-lock problems, filling issues, error codes, vibration, and failure to start.

2. Why is my refrigerator not cooling properly?

Several issues can cause poor cooling, including temperature-control faults, airflow problems, fan failures, defrost problems, electrical faults, compressor issues, or refrigeration-system problems. Proper diagnosis is required to identify the specific cause.

3. Should I continue using a leaking washing machine?

It is generally safer to stop using an appliance that is leaking significantly until the source of the leak has been identified, particularly where water could reach electrical components.

4. How do I know if my fridge needs professional repair?

Warning signs include inadequate cooling, excessive ice, repeated cycling, unusual noises, water leaks, a compressor that does not start normally, or significant changes in temperature.

5. Can appliance maintenance prevent every breakdown?

No. Maintenance can reduce some avoidable problems and help identify developing faults, but components can still wear out or fail unexpectedly.

6. Can unusual washing machine noises indicate a serious problem?

They can. The cause may range from a foreign object or unbalanced load to worn bearings, suspension components, motor problems, or other mechanical faults. Persistent abnormal noise should be investigated.

7. Why does my washing machine leave clothes very wet?

The problem may involve incomplete spinning, drainage restrictions, a pump fault, load imbalance, or another mechanical or electronic issue. Diagnosis can determine the specific cause.

8. Why does my refrigerator have excessive ice?

Excessive ice can be associated with defrost-system problems, a damaged door gasket, airflow issues, temperature-control problems, or frequent warm-air entry. The cause should be established before replacing components.

If your washing machine or refrigerator is malfunctioning, Appliance Repair Service can help diagnose the problem and determine an appropriate repair solution. For washer and fridge repairs at Mountain View, call 0720048519.

Need a hand with your appliance?

Our engineers repair washing machines, cookers, ovens, fridges, freezers and dishwashers across Nairobi.

Appliance Repair Nairobi

Appliance Repair Nairobi

Home Appliance Repair Specialists